Greetings from holland

hello!

my name is Dirk and i live in holland.
i drive a black tigra 1.4
here are some pics of my car.
it has 17 inch rims, a remus double exaust, angel eyes front, lexus look taillights
and also green LED light under the car







i recently added eyebrows/angry look?? to my hood






custom/self made cockpit



im currently busy with the ice in my car


polyester



kabels and stuff


this is the woofer that i have.
the rockford fosgate T2, 1000w rms :P

this is my radio with automatic flip screen


these are my screens in the sunflaps





i'll keep you posted with pics of my project


greetz

Edited by Tigra-Dirk - 3/2/2008, 17:56

you are my savior.......
what type of hands have you used?
I have the km/h and rpm of the OPC style and I would like to put us the illuminated hands but nn I know whether to use...

i used the arrows/indicators of an opel astra G.
i've adjusted them so the would fit in the tigra.
place the LED lights was pretty hard work, because of the little space you have.

it was a lot of work, but with the patience and an creative mind it will work.

goodluck


witch part do you mean with hands?

but this indicators aren't equal of tigra B....

i dont know, i have an tigra a.
sorry

mmm ok... thank's a lot....

like i said before, im currently busy with the audio/ICE in my car.
here are some pictures of how far i'am right now.

first i had to make some room






because of the thick cables i had to use, there was no way i could keep the battery in the original place.
so i had to build a frame in my spare tyre place.



i've made a wood floor to mount the battery on, i also build a frame over the battery so it could not move a bit.

i also placed some new ground connectors





the battery again, and some mounted cables


then i placed all of the interior panels back in the car sow i could start building a subwoofer box.
i sealed all of the spaces between the different parts with kit/glue



then i placed isolation foam.. for a better sound quality
and as you can also see, i've made a hole on both sides so i can easy replace lights..



here is an idea of how it will look like when it's finished.
there will also be added an 7 inch monitor and a capacitor



here you can see the space between the wooferoutlet and the floor.
it is very important that you have enough space there because else your woofer does not sound so good, you will hear a sucking and blowing sound.
and we dont want that



i have also started making the speaker rings for the doors.
but im not finished with them yet.

a sneak preview





i will update soon.

greets



this is the woofer that i have

woofer-link




and this is the amp for the woofer
the audio-system F2-500

2 x 230 Watt RMS op 4 ohm
2 x 390 Watt RMS op 2 ohm
2 x 590 watt RMS op 1 ohm
1 x 800 Watt RMS gebrugd op 4 ohm
1 x 1180 Watt RMS gebrugd op 2 ohm
Lowpass regelbaar tussen 45 - 300 Hz.
Highpass regelbaar tussen 20 - 150 Hz
Frequentiebereik: 10 - 160.000 Hz
Signaal/Ruis verhouding bij 90% vermogen 10Hz - 22KHz: 104 dB
Dempingsfactor: > 400
Gevoeligheid: 0.17 - 4.3 Volt
Afmetingen: 220x550x50

Hello All From England.

I would like some help with removing rear door cards and rear seats on a 99 tigra chequers please. I have changed my front door speakers but would like help with my rears and running cables for my sub.

A step by step guide would be very helpfull, as iv'e been searching for ages! It's just i dont want to break any clips whilst pulling away parts ect.

Regards,
Richard